Print

OXYGEN FREE COPPER ROD

 

 

 COOPER_ROD


Technical data

Product: Copper wire rod of diameter (8±0.40) mm, produced by continuous casting named “UPCAST”
Standard: BDS EN 1977:2003
Material used in production: Copper cathodes grade designation Cu-CATH-1 acc. to BDS EN 1978:2002.
Typical chemical composition:

Cu – 99.99%

ppm

Ag

Al

As

Bi

Cd

Co

Cr

Fe

Mg

Mn

NI

S

6.56

<0.080

1.23

0.348

<0.35

0.303

0.208

8.627

<0.10

<0.11

<0.20

5.257

                       

P

Pb

Sb

Se

Si

Sn

Te

Zn

Zr

H

O

 

0.75

0.728

1.123

<0.65

1.16

<0.65

<2,7 <1.1 <0.090 0.30 <2.0  



Physical properties:
Tensile strength : min 170 MPa
Elongation : min 40 %
Resistance in 20°C: max. 0.01707 Ω.mm2 /m

Packing: The rod is supplied on coils of approximately 3000 kg weight in one piece without joins. The coils are transported on wooden pallets secured to the pallets with plastic straps. Every coil is covered with plastic foil for protection against adverse conditions. The surface of rod is coated with anti-corrosion synthetic wax layer which secures against oxidation during transport and storage.

 

 

 

 

 

COPPER CONDUCTORS OF CABLES, WIRES AND FLEXIBLE CORDS

COPPER CONDUCTORS OF CABLES
 


Application

The conductors are intended to use different types of cables, wires and cords

Technical data

  • manufactured acc. to IEC 60228
  • the conductors may be wound on metal and wooden drums of different sizes
  • the conductors of 1,5 mm2 to 10 mm2 - class 1 may be wound in metal containers

 


Conductor design

  • solid conductors class 1 acc. to IEC 60228
  • stranded conductors class 2, 5, 6 acc. to IEC 60228 
 
 
Conductor cross section class 1 acc. to IEC 60228 class 2 acc. to IEC 60228
  Weight Conductor diameter Weight
mm2   kg/km mm kg/km
0,50     4,8  0,9  4,8
0,75     7,2  1,1  7,2
1,00     9,6  1,3  9,6
 1,50     14,4  1,6 14,4
 2,50    24,0  2,0 24,0
 4,00    38,4  2,5  38,4
 6,00    57,6  3,1  57,6
 10,00      96,0  4,0  96,0
 16,00      153,6   5,0 153,6
 25,00        6,3  240,0
35,00       7,4  336,0
50,00       8,7  480,0
70,00      10,5  672,0
95,00      12,3  912,0
     
Conductor cross section class 5 acc. to IEC 60228 class 6 acc. to IEC 60228
Conductor diameter Weight Conductor diameter Weight
mm2  mm kg/km mm kg/km
0,50  0,9     4,8 0,9   4,8
0,75  1,2     7,2 1,1   7,2
1,00  1,3     9,6 1,3   9,6
 1,50   1,6    14,4 1,6  14,4
 2,50  2,0    24,0 2,2  24,0
 4,00  2,5    38,4 2,9  38,4
 6,00  3,2    57,6 3,7  57,6
 10,00    5,0    96,0 4,6  96,0
 16,00    5,8  153,6 6,0 153,6 
 25,00    7,3  240,0    
35,00   9,1  336,0    
50,00   11,0    480,0    
70,00   13,4    672,0    
95,00   14,2    912,0    
120,00     16,2    1152,0